Episode #166 – 2009-2010 Honda Fit Base Keyless Entry
A cheaper way to get keyless entry in your Fit Base model. Buy Yours Here!
A cheaper way to get keyless entry in your Fit Base model. Buy Yours Here!
NOTES: • The system accepts up to three transmitters. The transmitter codes are stored in a stacking-type memory. If a fourth transmitter code is programmed, the code for the first transmitter is erased. • Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work. You must reprogram all of the transmitters once you are in the programming mode. • You must complete each step within 4 seconds of the previous step to keep the system from exiting the programming mode. Program the transmitters within 10 seconds. Programming the Transmitter 1. Turn the
Read More
NOTES: • The system accepts up to three transmitters. The transmitter codes are stored in a stacking-type memory. If a fourth transmitter code is programmed, the code for the first transmitter is erased. • Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work. You must reprogram all of the transmitters once you are in the programming mode. • You must complete each step within 4 seconds of the previous step to keep the system from exiting the programming mode. Program the transmitters within 10 seconds. Programming the Transmitter 1. Turn the
Read More
NOTES: • The system accepts up to three transmitters. The transmitter codes are stored in a stacking-type memory. If a fourth transmitter code is programmed, the code for the first transmitter is erased. • Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work. You must reprogram all of the transmitters once you are in the programming mode. • You must complete steps 1–6 within 4 seconds of the previous step to keep the system from exiting the programming mode. Programming the Transmitter 1. Turn the ignition switch to ON (II). 2.
Read More
NOTES: • The system accepts up to three transmitters. The transmitter codes are stored in a stacking-type memory. If a fourth transmitter code is programmed, the code for the first transmitter is erased. • Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work. You must reprogram all of the transmitters once you are in the programming mode. • You must complete steps 1–6 within 4 seconds of the previous step to keep the system from exiting the programming mode. Programming the Transmitter 1. Turn the ignition switch to ON (II). 2.
Read More